-40%
460 V 3 Phase 20 HP Rotary Screw Air Compressor with Air Dryer and 80 Gal Tank
$ 3853.87
- Description
- Size Guide
Description
460 V 3 Phase 20 HP Rotary Screw Air Compressor with Air Dryer and 80 Gal TankModel: PACK15-tae
Working pressure: 125-150PSI
Pressure :8Bar-10Bar
Airflow Volume:(CFM)81-71
Power:20 hp / 15 KW
Max :NPT1"
Cooling: Air
Electric motor: 460V/60HZ/ 3 Phase
Warranty: 12 months
Dimension: 72*35*72 inch
Weight:1235 lbs
Application:
Air Brushing,Blow Cleaning,Bolting/Wrenching,Brad Nailing/Stapling,Cutting,Drilling,Finish Nailing,Framing Nailing,Grinding,
HVLP Painting,Hobby Nailing,Hobby Painting,Inflation,Roof Nailing,Sanding,Spraying,Surface Prep
Garage & Industrial & Light Duty
Features a programmable control system
Reduces your air system footprint and allows for easy maintenance
Prepare to be amazed at the low decibel level of the QRS (Quiet Rotary Screw) 20HP air compressor from HPDAVV. This engineering marvel is quiet, powerful, reliable and made to be operating all day, every day, providing your shop with a consistent supply of compressed air when you need it. With its 20hp motor and 80-gallon receiver tank, the HPDAVV is set to provide un-equaled pressure and consistency unlike any other compressor line on the market. Less maintenance than a piston-based air compressor and equipped with a tank-mounted air dryer to provide moisture-free air flow, the HPDAVV should be a staple of any shop looking to increase production by getting customers in and out quickly and efficiently.
Equipped with the latest generation of screw element for improved free air delivery and efficiency.
Easy to use, efficient, and reliable, the HPDAVV range meets the compressed air demands of tire shops, paint shops, car dealers, maintenance shops and more. The range is quiet by design, allowing it to be installed almost anywhere in the workshop, without disturbing your working environment. Base mounted or tank mounted, with or without dryer, and with 125-150 psig pressure variants available, the Quiet Rotary Screw is a complete solution for your business.
Caution:
Please read the operate manual carefully before start the compressor working
— Don’t dismantle any connector or equipment when machine is
running. Otherwise, the high-pressure gas and high temperature will
hurt you seriously.
— Please pay more attention to parts such as pump, oil tank and
pipelines, because they are high temperature when machine is running.
— Don’t try to change the working pressure rated . Because change
working pressure exceeding the rated range will cause machines to
overload and stop to work.
——
— Provide proper grounding connection for electric parts according
to electric security regulations. Use suitable wires matching the
working power, otherwise they will burnt out due to high temperature
or some other dangerous events occur.
— The compressed air for breathe use is prohibit.
Regular maintenance interval schedule:
Every 50 hours or weekly
--- Check oil level.
--- Check intake filter, if necessary clean it.
--- Drain condensation water from oil tank.
Every 500 hours
--- Check and adjust belt tension if necessary (belt driven only)
Every 2000 hours
--- Replace lubricants (for mineral lubricants oil)
--- Replace oil filter.
--- Replace intake filter
Every 4000 hours
--- Replace lubricants (for synthetic lubricants oil)
--- Replace oil separator
--- Clean cooler for dirt
Attention:
1、Replace filter element and lubricant after first 500 hours of operation.
2、Use incorrect lubricant oil and spare parts will cause compressor damage, only use original
manufacture oil and parts.
3、The service life of compressor depends on the environment conditions such as dust, vent etc.
Model
Model Power(KW)
Model Power(HP)
Input Voltage(V)
Electrical (PH)
Max. Pressure (PSI)
Max bar (Bar)
Air Flow (CFM)
Output Pipe
Diameter
Link
PACK4-TU (with ASME 60 Gal tank)
4
5.5
220V/60HZ
1 PH
175 PSI
12 BAR
18CFM
NPT3/4"
https://www.ebay.com/itm/XXX/313677735492
PACK5-TU
5.5
7.5
220V/60HZ
1 PH
175 psi
12 bar
18 cfm
NPT3/4"
https://www.ebay.com/itm/XXX/313582973067
PACK5-230V (with ASME 60 Gal tank)
5.5
7.5
230V/60HZ
3 PH
125 psi-150 psi
8 bar - 10bar
29-25 cfm
NPT3/4"
https://www.ebay.com/itm/XXX/313582948907
PACK7-230V
7.5
10
230V/60HZ
3 PH
125 psi-150 psi
8 bar - 10bar
39-35 cfm
NPT3/4"
https://www.ebay.com/itm/XXX/313582987510
PACK7-460V
7.5
10
460V/60HZ
3 PH
125 psi-150 psi
8 bar - 10bar
39-35 cfm
NPT3/4"
https://www.ebay.com/itm/XXX/313583008013
PACK7V-230V (Variable Frequency Drive)
7.5
10
230V/60HZ
1 PH / 3PH
125 psi-150 psi
8 bar - 10bar
39-35 cfm
NPT3/4"
https://www.ebay.com/itm/XXX/313707822085
PACK7-T (with 40 gal tank)
7.5
10
230V/60HZ
3 PH
125 psi-150 psi
8 bar - 10bar
39-35 cfm
NPT1"
https://www.ebay.com/itm/XXX/313583059547
PACK11-230V
11
15
230V/60HZ
3 PH
125 psi-150 psi
8 bar - 10bar
57-46 cfm
NPT 3/4“
https://www.ebay.com/itm/XXX/313631819329
PACK15-TA-230V
15
20
230V/60HZ
3 PH
125 psi-150 psi
8 bar - 10bar
81-71 cfm
NPT1"
https://www.ebay.com/itm/XXX/313583146471
PACK15-TA-460V
15
20
460V/60HZ
3 PH
125 psi-150 psi
8 bar - 10bar
81-71 cfm
NPT1"
https://www.ebay.com/itm/XXX/313583160898
SC22-230V
22
30
230V/60HZ
3 PH
125 psi-150 psi
8 bar - 10bar
125-113 cfm
NPT1"
https://www.ebay.com/itm/XXX/313718573871
SC22V (Variable Frequency Drive)
22
30
230V/60HZ
3 PH
125 psi-150 psi
8 bar - 10bar
125-113 cfm
NPT1"
https://www.ebay.com/itm/XXX/313719582518
SC22-TA-230V
22
30
230V/60HZ
3 PH
125 psi-150 psi
8 bar - 10bar
125-113 cfm
NPT1"
https://www.ebay.com/itm/XXX/313611775195
SC22-TA-460V
22
30
460V/60HZ
3 PH
125 psi-150 psi
8 bar - 10bar
125-113 cfm
NPT1"
https://www.ebay.com/itm/XXX/313647642667
SC37-230V
37
50
230V/60HZ
3 PH
125 psi-150 psi
8 bar - 10bar
219-198 cfm
NPT 1 1/2"
https://www.ebay.com/itm/XXX/313647699112
SC37-460V
37
50
460V/60HZ
3 PH
125 psi-150 psi
8 bar - 10bar
219-198 cfm
NPT 1 1/2"
https://www.ebay.com/itm/XXX/313629116601
SC37V (Variable Frequency Drive)
37
50
460V/60HZ
3 PH
125 psi-150 psi
8 bar - 10bar
219-198 cfm
NPT 1 1/2"
https://www.ebay.com/itm/XXX/313719912080
SC75V (Variable Frequency Drive)
75
100
460V/60HZ
3 PH
125 psi-150 psi
8 bar - 10bar
425-390 cfm
NPT2”
https://www.ebay.com/itm/XXX/313594526317